Added ICM20948 support

app/src/routes/peripherals/i2c/i2c.svelte

@@ -16,6 +16,11 @@
             part_number: 'MPU6050',
             name: 'Six-Axis (Gyro + Accelerometer) MEMS MotionTracking™ Devices'
         },
+        {
+            address: 105,
+            part_number: 'ICM20948',
+            name: 'Nine-Axis (Gyro + Accelerometer + Magnetometer) MEMS MotionTracking™ Device'
+        },
         { address: 115, part_number: 'PAJ7620U2', name: 'Gesture sensor' },
         { address: 119, part_number: 'BMP085', name: 'Temp/Barometric' }
     ]

esp32/features.ini

@@ -13,6 +13,8 @@ build_flags =
   -D USE_HMC5883=0
   -D USE_BMP180=0
   -D USE_MPU6050=0
+  -D USE_ICM20948=1
+  -D USE_ICM20948_SPIMODE=0
   -D USE_WS2812=1
   -D USE_BNO055=0
   -D USE_USS=0

esp32/include/features.h

@@ -12,7 +12,7 @@
 #define USE_CAMERA 0
 #endif
 
-// ESP32 IMU on by default
+// ESP32 IMU off by default
 #ifndef USE_MPU6050
 #define USE_MPU6050 0
 #endif
@@ -22,6 +22,14 @@
 #define USE_BNO055 1
 #endif
 
+// ESP32 IMU off by default
+#ifndef USE_ICM20948
+#define USE_ICM20948 0
+#endif
+#ifndef USE_ICM20948_SPIMODE // I2C on by default
+#define USE_ICM20948_SPIMODE 0
+#endif
+
 // ESP32 magnetometer on by default
 #ifndef USE_HMC5883
 #define USE_HMC5883 0

esp32/include/peripherals/imu.h

@@ -6,6 +6,10 @@
 #include <ArduinoJson.h>
 #include <utils/math_utils.h>
 
+#if FT_ENABLED(USE_ICM20948)
+#include "ICM_20948.h" 
+#endif
+
 #if FT_ENABLED(USE_MPU6050)
 #include <MPU6050_6Axis_MotionApps612.h>
 #endif
@@ -67,6 +71,26 @@ class IMU : public SensorBase<IMUAnglesMsg> {
             return false;
         }
         _imu.setExtCrystalUse(true);
+#endif
+#if FT_ENABLED(USE_ICM20948)
+    #if USE_ICM20948_SPIMODE > 0
+        _imu.begin(CS_PIN, SPI_PORT);
+    #else
+        _imu.begin(Wire, 1);
+    #endif
+    if (_imu.status != ICM_20948_Stat_Ok){ return false; }
+    
+    _imu.setSampleMode((ICM_20948_Internal_Acc | ICM_20948_Internal_Gyr), ICM_20948_Sample_Mode_Continuous);
+    if (_imu.status != ICM_20948_Stat_Ok){ return false; }
+    
+    ICM_20948_fss_t myFSS;
+    myFSS.a = gpm2;
+    myFSS.g = dps250;
+    _imu.setFullScale((ICM_20948_Internal_Acc | ICM_20948_Internal_Gyr), myFSS);
+    if (_imu.status != ICM_20948_Stat_Ok){ return false; }
+    // TODO: Setup low pass filter config
+    _imu.startupMagnetometer();
+    if (_imu.status != ICM_20948_Stat_Ok){ return false; }
 #endif
         return true;
     }
@@ -84,12 +108,31 @@ class IMU : public SensorBase<IMUAnglesMsg> {
         }
         return false;
 #endif
+#if FT_ENABLED(USE_ICM20948)
+        if (_imu.dataReady())
+        {
+            _imu.getAGMT();
+            _msg.rpy[0] = _imu.magX();
+            _msg.rpy[1] = _imu.magY();
+            _msg.rpy[2] = _imu.magZ();
+        }
+#endif
 #if FT_ENABLED(USE_BNO055)
         sensors_event_t event;
         _imu.getEvent(&event);
         _msg.rpy[0] = event.orientation.x;
         _msg.rpy[1] = event.orientation.y;
         _msg.rpy[2] = event.orientation.z;
+#endif
+#if FT_ENABLED(USE_ICM20948)
+    #if FT_ENABLED(USE_ICM20948_SPIMODE) > 0
+        #define SPI_PORT SPI // TODO in periphearals_seetings.h
+        #define CS_PIN 2 
+        ICM_20948_SPI _imu;
+    #else
+        //#define WIRE_PORT Wire 
+        ICM_20948_I2C _imu;
+    #endif
 #endif
         return true;
     }
@@ -113,4 +156,14 @@ class IMU : public SensorBase<IMUAnglesMsg> {
 #if FT_ENABLED(USE_BNO055)
     Adafruit_BNO055 _imu {55, 0x29};
 #endif
+#if FT_ENABLED(USE_ICM20948)
+    #if FT_ENABLED(USE_ICM20948_SPIMODE) > 0
+        #define SPI_PORT SPI // TODO in periphearals_seetings.h
+        #define CS_PIN 2 
+        ICM_20948_SPI _imu;
+    #else
+        //#define WIRE_PORT Wire 
+        ICM_20948_I2C _imu;
+    #endif
+#endif
 };

esp32/include/peripherals/peripherals.h

@@ -87,10 +87,10 @@ class Peripherals : public StatefulService<PeripheralsConfiguration> {
 
     JsonDocument doc;
     char message[MAX_ESP_IMU_SIZE];
-#if FT_ENABLED(USE_MPU6050 || USE_BNO055)
+#if FT_ENABLED(USE_MPU6050 || USE_BNO055 || USE_ICM20948)
     IMU _imu;
 #endif
-#if FT_ENABLED(USE_HMC5883)
+#if FT_ENABLED(USE_HMC5883 || USE_ICM20948)
     Magnetometer _mag;
 #endif
 #if FT_ENABLED(USE_BMP180)

esp32/src/features.cpp

@@ -12,6 +12,7 @@ void printFeatureConfiguration() {
     ESP_LOGI("Features", "USE_MOTION: %s", USE_MOTION ? "enabled" : "disabled");
 
     // Sensors
+    ESP_LOGI("Features", "USE_ICM20948: %s", USE_ICM20948 ? "enabled" : "disabled");
     ESP_LOGI("Features", "USE_BNO055: %s", USE_BNO055 ? "enabled" : "disabled");
     ESP_LOGI("Features", "USE_MPU6050: %s", USE_MPU6050 ? "enabled" : "disabled");
     ESP_LOGI("Features", "USE_HMC5883: %s", USE_HMC5883 ? "enabled" : "disabled");
@@ -31,8 +32,8 @@ void printFeatureConfiguration() {
 
 void features(JsonObject &root) {
     root["camera"] = USE_CAMERA ? true : false;
-    root["imu"] = (USE_MPU6050 || USE_BNO055) ? true : false;
-    root["mag"] = (USE_HMC5883 || USE_BNO055) ? true : false;
+    root["imu"] = (USE_MPU6050 || USE_BNO055 || USE_ICM20948) ? true : false;
+    root["mag"] = (USE_HMC5883 || USE_BNO055 || USE_ICM20948) ? true : false;
     root["bmp"] = USE_BMP180 ? true : false;
     root["sonar"] = USE_USS ? true : false;
     root["servo"] = USE_PCA9685 ? true : false;

platformio.ini

@@ -116,6 +116,7 @@ lib_deps =
 	adafruit/Adafruit Unified Sensor@^1.1.14
     adafruit/Adafruit BNO055@^1.6.4
 	FastLED@3.5.0
+    sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@^1.3.2
 extra_scripts = 
 	pre:esp32/scripts/pre_build.py
     pre:esp32/scripts/build_app.py